Introduce
You will be very bored when skateboarding at a slow pace. Skateboarders are always looking for ways to make the wheel go faster. You should know how to make skateboard faster. Skateboard Cast will help you gain more knowledge!
[toc]
How To Make Skateboard Wheels Faster?
When skateboarding for a while, people will find a way to make the wheel go faster. Specifically, the steps to make skateboard wheels faster:
- Choose bearings of the highest quality.
- Clean regularly to keep bearings from getting dirty.
- Loosen the gaskets contained in the bearings, do not expose them to water.
- Loosen the nuts on the wheel with a wrench.
- Check if the skateboard is running as fast as you want.
Select bearings of the highest quality
Mainly the slow skateboard wheel is due to the bearings not working properly. It may be due to long-term use. Sometimes it’s because you buy bad bearings.
The most important thing is still to choose the material of the bearings. You should select high-quality materials with long-term value.
Clean the bearings to avoid dust
After using the skateboard for a while, you should clean the bearings. Since it can get dirty, we need to remove it quickly.
You should remove the ring from the wheel. Then take the steps to clean them. Finally, dry in a cool place before reassembly.
In the cleaning step, we can use lubricants to remove stains easily. This also makes the operation of the bearings smoother.
Loosen the gaskets contained in the bearings
Bearings do not definitely have spacers. Only when you buy a poor quality product is it necessary to fix it.
If you buy a high-quality product, it is not necessary. You can also loosen the sealing ring and when cleaning does not let it come into contact with water.
Experts recommend that you do not use wet, water-soaked bearings on the wheels of a skateboard. Because of this, the bearings will quickly fail. The main consequence is having to buy a new product.
After cleaning, you should keep them in a cool place. We can also use a dryer to dry.
You should clean the bearings.
Use a wrench to loosen the wheel nuts
Not only inside the bearings, but you should also pay attention to the wheel nuts. Sometimes people tighten the nut too much which also makes the travel speed slow.
First, shake the skateboard to check if the wheels move normally. If the wheel is not moving, it means it is very tight. At this point, the tool to prepare is a wrench that is neither too big nor too small. You can ask the salesperson at the skateboard store to buy the right size.
You use the wrench to loosen the nut. We will turn it counter-clockwise. Open each nut ring to an appropriate degree.
Check the wheel speed
When we do, we need to check that the skateboard wheel moves properly. If not checked, the wheel will become too tight or too loose.
Then you will spend more time and effort to fix it. So no matter what step you take, you need to check.
We will rely on the above 2 factors to make the wheel run faster. You need to check both the wheel and the bearings for the cause.
There are two main causes: the wheel is tightening or the bearing is faulty. You have to find the exact cause before you can find the right solution.
Is There A Method To Get You Skateboarding Wheels Faster?
People who become professional skaters have to go through a lot of research. They also offer many methods to get the skateboard wheel faster. You can also apply it to your skateboard.
Make aerodynamics significantly increase
Skateboarders love to use this technique. It helps to make their migration process as fast as desired. We don’t need to use any tools.
You will apply resistance when skateboarding. The purpose of this impact is to cut the surface area when exposed to the air. It helps your legs become neater and more agile. The way to do it is to use your hips to bend.
Or another method is to crouch low. It also makes your skateboard’s wheels move significantly faster.
Take the skateboard’s wheels on flat, obstacle-free roads
As a law of nature, when going uphill everything slows down. When skateboarding, you encounter obstacles on the road.
The best way is to choose a flat site with no obstacles. Sometimes there are a lot of obstacles on the way. It will cause accidents when skateboarding. These things will make the player spend less time on the skateboard. Thereby it will also increase the largest speed.
Choose the most convenient skate playground, for example, Street, stadium…
Don’t try to move fast by jerking the deck
You should not sway a skateboard’s wheel from right to left or vice versa. We should go on a straight path. This way, you will be able to control the skateboard’s wheel to run faster. It will also take less travel time.
This method is not a technique you have to learn. It’s just a matter of finding the place so it’s very easy.
Frequently Asked Questions
1. How to know if the skateboard wheel is too tight to move quickly?
You need to pick up the skateboard and then release the wheel. If the wheel stops before 2 seconds, it is too tight.
2. What to do with the damaged skateboards wheel bearings?
With bearings, you can only clean when dirty, not repair when broken. So the best way when it breaks is to buy a new one.
3. Is it important to make the skateboard wheels go fast?
It doesn’t matter to everyone. Only professional skaters understand the importance of running fast. Beginners don’t care about this.
4. How to improve fast skateboarding skills?
No one can help you better than your own efforts. We have to learn and practice regularly. If you skate every day, one day you will be successful.
| See more: |
Conclusion
To become a professional skateboarder, fast skateboarding technique is very important. Therefore, learning how to make skateboard wheels faster is essential. Please read and refer to the relevant information to get more necessary knowledge.
Thank you for reading!
Conference
